Edit Serial Port Parameters

About this task

Perform this procedure to specify serial port communication settings. The serial port on the device is the console port.

Procedure

  1. In the Device Physical View tab, select the console port on the device.
  2. In the navigation pane, expand Configuration > Edit.
  3. Select Serial Port.
  4. Edit the port parameters as required.
  5. Select Apply.

Serial Port Field Descriptions

Use the data in the following table to use the Serial Port tab.

Name

Description

IfIndex

Identifies the port as a serial port.

BaudRate

Specifies the baud rate of this port.

The default value is 115200.

DataBits

Specifies the number of data bits, for each byte of data, this port sends and receives. The default is eight.